Instrukcija rankinis alyva temperatūra būgnas mašina
Veikimas Atsargumo priemonės
1. ◆When the external power supply of the machine is not powered off, press the automatic shutdown button and the temperature is lower than 100 degree , the machine will stop after the automatic shutdown time expires. ◆If the external power supply of the machine is cut off and the temperature is higher than 100 degree , it must be manually in time to remove the felt nuo the būgno.
2. Automatinis reguliavimas iš antklodės: Kai the machine has the function of automatic adjustment of blankets, manual adjustment is not required, and manual adjustment is only used when automatic adjustment fails.
3. Kai mašina yra šildomas, in order to prevent the blanket from burning out, the machine must be rotated, during the rotation of the machine, in order to prevent the blanket from deviating and damageging the blanket and ensure safety, please be sure to have someone to supervize.
4. In the case of high temperature, emergency shutdown or power failure, please adjust the blanket to the maximum distance of the adjustment roller at the first time, and observe that the blanket is visiškai atskirta nuo the high temperature roller. Paprastai, a distance of 5-8CM should be ensured.
5. Visi besisukantys guoliai of the machine must be added with high temperature butter once a week to ensure the normal rotation of the bearings.
6. It is normal if the indicator light flashes when the machine blanket is moving forward and back. It is not normal if the indicator light flashes when there is no movement of the blanket. The machine blanket has an automatic edge correction function. It is abnormal if the side indication does not stop and flashes for a long time).
1. The numbers displayed on the thermometer are beating irregular: observe whether there is sparking at the copper ring of the five conductive rings in the electric box. Ring contact is uniform;
2. blanket deviation: check whether the edge correction motor of the blanket rotates; check whether the edge correction micro switch works normally;
3. The blanket will not automatically disengage: check whether the blanket drives the motor to rotate;
4. Yra yra a garsiai triukšmas: patikrinkite ar the roller drive bearing is broken;
5. The blanket does not run smoothly and is accompanied by a clicking or whining sound: check whether the gearbox rotates normally.
Specialus įspėjimas:
1. In the case of high temperature, emergency shutdown or power outage, please adjust the blanket to a maximum safety distance of 5-8CM from the drum for the first time, so as to ensure that the blanket will not be hurt.
3. Visi guoliai iš visa mašina turi būti pridėta su aukšta temperatūra sviestas kartą a savaitę užtikrinti užtikrinti normalus veikimas iš the guoliai.
telefonas: plius 86-13728058785
envelope: cathy@asia-print.com
adresas:Guangdong Province, China